Study of The Properties of Chemically Resistant Hydrophobic Polymer Composite Materials Based on Sulfur

Umida Ziyamukhamedova; Jasurbek Nafasov; Elbek Turgunaliev; Nilufar Maxamadieva; Alimardon Bobonorov

Authors

Umida Ziyamukhamedova Tashkent state transport university, Tashkent, Uzbekistan
Jasurbek Nafasov Tashkent state transport university, Tashkent, Uzbekistan
Elbek Turgunaliev Tashkent state transport university, Tashkent, Uzbekistan
Nilufar Maxamadieva Tashkent state transport university, Tashkent, Uzbekistan
Alimardon Bobonorov Tashkent state transport university, Tashkent, Uzbekistan

Keywords:

mechanical activation, sulfur, concrete, composite, filler, reinforcing, glass fiber

Abstract

Today, the processing of industrial waste and the use of resource-saving processing methods in production remain one of the main challenges. This article examines the analysis of components based on secondary raw materials in sulfur-based organomineral polymer materials, methods of their mechanical activation, and the influence of activation on the properties of the material. Additionally, when activating filler materials, the bonds formed during the simultaneous activation of two or more fillers are analyzed. The properties of the material obtained from the new composition were compared with the properties of M450 grade cement concrete, and the optimal amount of the new composition was proposed. It has been determined that the quantity and shape of gravel, which serves as an inert filler in a sulfur-based composite material, are the main factors determining the mechanical properties of the material.

References

[1] J. H. Nafasov, U. A. Ziyamukhamedova и G. B. Miradullaeva, «The research of the influence of the composition of components on the mechanical properties of structural polymer wear-resistant materials from thermosets,» Technical science and innovation, т. 2, pp. 179-183, 2022.

[2] Z. Umida, T. Elbek и N. Jasurbek., «Research on the dependence of the type of filler on the electrostatic charge generated during the friction of cotton raw material and polymer composite coating,» Universum: технические, т. 4(112), № 7, pp. 36-39, 2023.

[3] J. N. J. R. E. T. Z. &. D. A. (. .. I. (. 4. p. 0. Ziyamukhamedov, «E3S Web of Conferences,» в Research of hydroabrasive wear resistance of organomineral coatings depending on operating environment conditions, Tashkent, 2023.

[4] U. Ziyamukhamedova, E. Rakhmatov, E. Dustqobilov, J. Nafasov и J. Ziyamukhamedov, « AIP Conference Proceedings,» в Development of protective coating compositions for process tanks, Tashkent, 2023.

[5] U. Ziyamukhamedova, «International conference on multidisciplinary research and innovative technologies,» в Research of Electrical Conductivity of Heterocomposite Materials for the Inner Surface of a Railway Tank, Tashkent, 2021.

[6] U. A. Ziyamuxamedova, G. B. Miradullaeva и J. H. Nafasov, «Evaluation of the efficiency and operability of parts and assemblies made of engineering heterocomposite polymer materials,» Web of Scientist: International Scientific Research Journal,, т. 3, № 6, pp. 1328-1334, 2022.

[7] U. A. Ziyamuxamedova, G. B. Miradullaeva и J. H. Nafasov, «Mathematical description of rheological properties of compositions by prediction of their thickness,» Web of Scientist: International Scientific Research Journal, т. 6, № 3, pp. 538-545, 2022.

[8] Э. Рахматов, Ж. Нафасов, Ж. Зиямухамедов и Э. Тургуналиев, «Изучение влияния механизма механохимической активации на структуру гетерокомпозитов,» Innovatsion texnologiyalar, т. 1, № 49, pp. 67-75, 2023.

[9] S. Fayzibayev, O. Ignotenko, S. Mamayev, T. Urazbayev и J. Nafasov, «AIP Conference Proceedings,» в Development of a technique for the formation of Ti-Al system compounds under the influence of high pressures and temperatures, Tashkent, 2024.

[10] G. Miradullaeva, E. Rakhmatov, O. Bozorov, U. Ziyamukhamedova и B. Shodiev, « Energy, Environmental and Construction Engineering,» Springer International Publishing, т. 3, № 7, pp. 346-355, 2021.

[11] N. S. Negmatov, U. A. Ziyamukhamedova и A. R. Kuluev, «Antifriction materials and water-soluble compounds on basis of polymers for reducing the mechanical damage of cotton fibers.,» Plasticheskie Massy: Sintez Svojstva Pererabotka Primenenie, т. 1, № 4, pp. 42-45, 2002.

[12] U. Ziyamukhamedova, G. Miradullayeva, E. Rakhmatov и J. &. I. M. (. .. ,. 2. 6. Nafasov, «Development of The Composition of a Composite Material Based On Thermoreactive Binder Ed-20,» Chemistry and chemical engineering, т. 3, № 21, pp. 34-38, 2021.

[13] U. Ziyamukhamedova, H. Evlen, J. Nafasov, Z. Jalolova, E. Turgunaliyev и E. Rakhmatov, «E3S Web of Conferences,» в Modeling of the process of mechano activation of filler particles in polymer composites, Tashkent, 2023.

[14] U. Ziyamukhamedova, D. Djumabaev и B. Shaymardanov, «Mechanochemical modification method used in the development of new composite materials based on epoxy binder and natural minerals,» Turkish journal of Chemistry, т. 1, № 37, pp. 51-56, 2013.

[15] U. A. Ziyamuxamedova, G. B. Miradullaeva и N. J. H., «Study of the phase composition of products of mechanochemical interaction in Ta+ C systems,» Innovative Technologica: Methodical Research Journal , т. 3, № 6, pp. 61-67, 2022.